PRODUCT LINE
Spirax HD oils are extreme-pressure (EP) automotive hypoid gear oils designed to exceed the latest performance standards for heavy duty, severe service.
APPLICATIONS
Spirax HD oils are designed for service in the drive-train gears of heavily loaded equipment and passenger vehicles. They are recommended for the lubrication of hypoid, spur, bevel, helical, spiral-bevel and worm gears in differentials, transmissions, final drives, transfer cases, and steering mechanisms.
Spirax HD 75W-90 and 80W-90 are our premium all-season, multigrade gear oils designed to exceed Original Equipment Manufacturers lubrication requirements under today’s increased temperature and loads. Spirax HD 85W-140 is recommended for high temperature heavy duty equipment and is typically used in off-highway applications.
OUTSTANDING PROTECTION
PRODUCT LINE
SRS 2000 has been providing outstanding heavy duty water resistant protection for over 10 years. This semi synthetic grease has been the benchmark for performance in this severe service area because of the unique combination of thickener, polymers and additives.
APPLICATIONS
SRS 2000 will provide excellent service for trucks and other heavy duty fleet vehicles, construction equipment, agriculture and forestry equipment, car washes and marine applications. It resists water and provides long lasting protection for pins, bushings, 5th wheels, chassis points, universal joints, and couplings. They are approved by the CFIA (Canadian Food Inspection Agency) for industrial food plant use. Avoid food contamination during application and storage.
PERFORMANCE BENEFITS
- Exceptional Resistance to Water Washout - allowing the grease to work under the very wet conditions.
- Outstanding Mechanical Stability - to prevent grease breakdown, even in the presence of water.
- Corrosion Protection - to ensure your parts last longer.
- Excellent Adhesion (Tackiness) - stays in place for longer re-lubrication intervals.
TYPICAL PROPERTIES
| Summer | ASTM METHOD | |
| PRODUCT CODE | 510-332 | |
| NLGI Grade | 1.5 | |
| Colour | Red | |
| Appearance | Tacky | |
| Thickener | Li/Ca | |
| Worked Penetration 60 strokes at 25 °C 100,000 strokes at 25 °C 100,000 strokes at 25°C with 10% water added |
305 318 340 |
D217 |
| Estimated Operating Range Temperature, °C(1) | -15 to 135 | |
| Minimum Dispensing Temp, °C (1) | 0 | |
| Dropping Point, °C | 183 | D 2265 |
| Base Oil Viscosity cSt at 40 °C - Blended cSt at 40 °C - Extracted cSt at 100 °C - Extracted |
171 600 37.2 |
D 445 D 445 D 445 |
| EP Tests 4-Ball Scar, mm 4-Ball, Load Wear Index Timken OK Load, kg |
0.5 50 18.2 |
D 2266 D 2596 D2509 |
| Water Spray Off , % Loss | 50 | D 4049 |
| Water Washout Test @ 78 °C, wt. % loss |
5 | D 1264 |
| Bomb Oxidation at 99 °C Pressure Drop at 100h, kPa |
20 | D 942 |
| Corrosion Test 48 hour @ 52 °C | Pass | D 1743 |
| Oil Separation wt. % | 0.3 | D 1742 |
| Mobility @ -17.8 °C, g/min | 0.8 | USS DM-43 |
(1) may vary with design of equipment
(2) applicable to the NLGI 2 grade only